Horizon Fitness Perfect Binder BQ-260 Manual page 10

1. Machine Parts Descriptions
1-2 Control Panel
Trouble Monitor
Indicates incorrect point on BQ-260.
When one of them turns on except power
lamp, BQ-260 can not be started.
Each LED turns on when :
(1) safety cover opens.
- Close safety cover.
(2) milling cutter does not rotate although
with milling binding mode is selected.
- Depress milling cutter start button to
rotate milling cutter.
(3) level plate opens.
- Depress start button to reset level plate.
(4) emergency stop switch is depressed.
- Pull up emergency stop switch to re-
lease it.
NOTE : Difference of Nipper Movement
Nipping unit has two different movements, with milling binding mode and signature bind-
ing mode. In with milling binding mode, nipper plate raises at first and then front and back
nipper jaws nip stock. So, this binding mode is suitable for binding milled stock or cut sheet
stock. In signature binding mode, nipper plate and two nipper jaws raise and nip stock at
same time. So this binding mode is suitable for binding signature which spine is shaped
thicker because of folded edge. Book spine will be formed too sharp or destroyed when
spine is pressed at first as in with milling binding mode. Binding quality or book spine
shape bound with signature binding mode is not affected so much by folding.
With Milling Binding Mode
(1)
(7)
(2)
2 2
1
Trouble Monitor
(6)
(3)
(5)
(4)
(5) glue is not ready for biding.
- Wait until glue will be melted.
(6) cover is not fed to stopper.
- Feed cover completely until it gets
stopped against stopper.
(7) main power is on.
1 1
1
Signature Binding Mode
4