Horizon Fitness Perfect Binder BQ-260 Manual page 31

4-1 Nipper Unit Set Up
7.
Place cover inside up on nipper unit, so
that far side and left side slightly touch
cover stopper and cover registers.
NOTE
Register side of cover must be placed against
cover registers.
8.
Turn cover stopper adjusting knob so
that marks on cover is positioned just on
center of nipper plate.
NOTE
Push or pull cover at the same time when
cover stopper is adjusted.
9.
Slide movable cover guide against cover
to fix cover position. And then fasten fix
knobs for movable cover guide.
NOTE
- Clearance between cover and movable cover
guide must be less than 0.5 mm.
- Check whether cover does not bend or does
not have play more than 0.5 mm.
10.
Close safety cover.
11.
Depress nipper up/down button to lower
nipper unit.
NOTE
Cover can be fed only when nipper unit is at
lower position.
Cover Stopper Adjusting Knob
Cover
Cover Registers
Nipping Plate
Cover
0.5 mm
25
4. Set Up BQ-260
Movable Cover Guides
Lock Knob
Cover Stopper
Movable
Cover Guide
0.5 mm
Nipper Up/Down Button