Open/Close Of Sucker Valve; Cover Feeder Position Set Up; Support Plate Set Up - Horizon Fitness Perfect Binder BQ-260 Manual

9. Installation of Suction Cover Feeder CF-260
9-2 Set Up and Operation

9-2-2 Open/Close of Sucker Valve

This procedure shows how to set up suckers
for deifferent size of cover.
1.
Pick up suckers which are going to suck
cover.
NOTE
Do not pick up suckers which does not com-
pletely placed on cover.
2.
Open those sucker valve with sucker
open/close tool.
Close other sucker valve.

9-2-3 Cover Feeder Position Set Up

This procedure shows cover feeder set up
according to cover size.
1.
Set up nipper referring to "4-1 Nipper
Unit Set Up"(page 22).
2.
Make sure that nipper is at lower posi-
tion.
3.
Place one cover on nipper.
4.
Turn table forward/backward handle
until the clearance between cover and feed
roller is 2 to 3 mm.

9-2-4 Support Plate Set Up

This procedure shows how to set support
plate.
1.
Select suitable size of support plate and
place it on nipper so that the clearance
between cover feeder and support plate is
20 mm.
NOTE
When the size of cover is B4 (10.1" x 14.3")
or larger than B4 use the support plate (L).
Feed Roller
2 ~ 3 mm
20 mm
72
Sucker Valve
Cover
Nipper
Supprt Plate