As Required; Milling Cutter Replacement - Horizon Fitness Perfect Binder BQ-260 Manual

8-2 As Required

8-2-1 Milling Cutter Replacement

Continuous use of dull milling cutter will
effect on binding finish quality. Replace
milling cutter as required.
WARNING
- Turn off main power before replacing
milling cutter.
- Ware gloves on your hands when
milling cutter is replaced. Cutter will
cause severe personal injury.
Necessary Tools : Double-ended Spanner
1.
Turn off main power.
2.
Access to milling cutter.
- Open safety cover.
- Remove spring on white cutter guard
from hook bolt.
- Remove both front and rear milling
guides.
3.
Remove milling cutter.
- Place thick cloth to hold milling cutter.
- Loosen four fix screws on milling cutter
and remove milling cutter.
4.
Install new or resharpened milling cutter
with reverse order of removing.
5.
Install milling guides.
- Install rear milling guide so that guide
aligned with three positioning pins.
- Install front milling guide.
- Hook spring on white cutter guide to
cover milling section.
(13 mm)
Allen Wrench (4 mm)
Thick Cloth
Hook Bolt
Spring White Cutter Guard
Front Milling Guide
Thick Cloth
Positioning Pins
Hook Spring
63
8. maintenance
Rear Milling Guide
Allen Wrench
Milling Cutter