Connecting Power Cord - Horizon Fitness Perfect Binder BQ-260 Manual

2. Installation Instructions
2-1 Installation Instructions
5.
Turn on main power or breaker in your
shop.
6.
Turn on power switch on BQ-260.
7.
Remove the spring and open the shutter
plate.
8.
Pull up stop button.
9.
Depress milling mode select switch to
far side to select with milling mode.
10.
Depress milling start button.
- Blower will start at the same time.
11.
Depress milling mode select switch to
near side to stop the milling cutter, watch-
ing the rotating milling cutter from above.
- Check the rotating direction of the milling
cutter.
- The milling cutter should rotate counter-
clockwise.
12.
If the milling cutter rotates clockwise,
stop immediately and perform as follows:
- Turn off power on BQ-260 and main
power or breaker in your shop.
- Change wiring on 3-phase terminal and
perform step 5 through 12.
13.
Depress stop button after connecting
power cord correctly.
Milling Start Button
Normal Rotating Direction
Dust Bag
12
Shutter Plate
Spring
Milling Mode
Select Switch
With Milling Mode
wat
Stop button