Feeding Test; Cover Piling - Horizon Fitness Perfect Binder BQ-260 Manual

9. Installation of Suction Cover Feeder CF-260
9-2 Set Up and Operation

9-2-6 Feeding Test

This procedure shows test feeding of cover.
1.
Press air pump ON button.
-Rollers rotates and air pump is turned on.
2.
Press one cycle button and feed one
cover to check the cover is fed on nipper
smoothly.
3.
If cover is not fed straightly and touches
some guides on nipper, adjust cover feed-
ing direction with skew adjustment knob.
4.
Try feeding covers a few times. When
covers are fed smoothly, leave only one
cover on nipper and start binding.

9-2-7 Cover Piling

This procedure shows the cover piling during
your binding job.
WARNING
Do not pile cover during binder works.
Moving parts may cause severe per-
sonal injury.
CAUTION
Lower table when cover is piled. Ignor-
ing the procedure may cause severe
machinery damage.
1.
Press table lower button.
-Table lowers and stops at lowest position.
2.
Pile covers so that covers touch front
guide and side guide.
3.
Press table up button. Table rises and
stops at feeding position.
4.
Press one cycle button. Sucker bar
moves forward and stops.
Compressor ON Button
One Cycle Button
One Cycle Button
74
Skew Adjust-
ment Knob
Table Up Button