Set Up And Operation; Cover Piling - Horizon Fitness Perfect Binder BQ-260 Manual

9-2 Set Up and Operation

9-2-1 Cover Piling

This procedure shows cover piling before
starting binding.
WARNING
Do not touch moving parts parts. Mov-
ing parts may cause severe personal
injury.
CAUTION
Do not place books, tools and so on
under table. They may cause machine
damage.
1.
Turn on power switch.
-Power lamp turns on.
2.
Press table lower button.
-Table lowers and stops at lowest position.
3.
Pile covers so that covers touch front
guide and side guide.
NOTE
- Straighten covers before piling. Wavy or
curled cover will cause inferior feeding such
as misfeed.
- Do not pile covers more than 10 cm.
4.
Place back guide at right corner of cover
on table.
5.
Press table up button.
-Table rises and stops at feeding position.
6.
Press one cycle button. Sucker bar
moves forward and then stops.
9. Installation of Suction Cover Feeder CF-260
Front Guide
Side Guide
One Cycle Button
71
Table Lower Button
Back Guide
Bin Up Button