Clean Up After Power Off; Milling Unit Clean Up - Horizon Fitness Perfect Binder BQ-260 Manual

7-4 Clean Up after Power Off

7-4-1 Milling Unit Clean Up

Milling unit must be cleaned after power off.
WARNING
Do not touch milling cutter or rough-
ening cutter with your hands or fingers.
Sharp cutter can cause severe personal
injury.
1.
Open safety cover.
2.
Hold holder on front milling guide and
pull front milling guide fully to near side.
3.
Clean paper dust on milling unit surface
with vacuum cleaner.
4.
Close safety cover.
Safety Cover
Holder
59
7. After Binding Finish
Front Milling Guide