Stop Button - Horizon Fitness Perfect Binder BQ-260 Manual

3. Before Starting Operation
3-1 Safety Device Function Check
This section shows how to check safety device
function. Check all safety device function
before starting operation on BQ-260.

3-1-1 Stop Button

WARNING
Do not touch clamper while clamper is
moving. Moving clamper can cause
severe personal injury.
1.
Pull up stop button. LED on monitor for
stop button turns off.
2.
Set nipping mode select switch to center
position to select pad binding mode.
- Pad binding lamp on control panel turns
on to indicate that pad binding is selected.
3.
Select without milling mode with milling
mode select switch.
- Confirm lamp on start button is ON.
NOTE
Depress level plate control button when start
lamp is not on.
Stop Button
Start Button
Nipping Mode Select Switch
Near Side
14
LED for Stop But-
ton
Center
Pad Binding
Lamp
Milling Mode
Select Switch