Cover Position Register Block Installation - Horizon Fitness Perfect Binder BQ-260 Manual

6-1 Small Size Binding

6-1-2 Cover Position Register Block Installation

This section shows how to install register
block when spine length of cover is shorter
than 130 mm (5.1").
WARNING
Depress stop button when you attach
cover position register blocks. Nipper
unit can cause severe personal injury.
NOTE
Cover position register block is not required
for pad binding.
Necessary Tools : Allen Wrench (3 mm)
1.
Depress stop button.
2.
Attach cover position register blocks on
nipper.
NOTE
- Attach cover position register blocks so that
beveled corner faces to right-near side.
- Fix cover position register blocks so that it
is parallel with nipper jaw edge.
- Fix cover position register blocks so that
screw comes at center of groove.
- The blocks can be slid right and left within
10 mm.
Stop Button
Nipper Jaws
Cover Position
Register Block
45
6. Special Binding Method
Beveled Corner