Horizon Fitness Perfect Binder BQ-260 Manual page 84

9. Installation of Suction Cover Feeder CF-260
9-4 Installation of CF-260
1.
Install BQ-260 referring to operation
manual for BQ-260.
2.
Install guide plate on BQ-260.
3.
Place CF-260 referring to right drawing.
-Fix BQ-260 with leveling bolts.
4.
Connect signal cable connector of CF-
260 to BQ-260.
5.
Remove front cover.
WARNING
When removing front cover, do not
insert your hands or fingers into inside
of machine. Moving parts may cause
severe personal injury.
6.
Connect power cord with 3-phase elec-
tricity.
7.
Turn on power switch of CF-260 and
press air pump ON button. Check rotating
direction of air pump fan. Make sure that
air pump fan rotates in correct direction
before pressing air pump OFF button .
8.
Turn power switch off.
9.
If motor fan does not rotate in correct
direction, perform from step 7 again after
exchange two electrical cord each other .
5 mm
5 mm
Power Switch
78
Guide Plate
10 mm
Leveling Bolt
Front Cover