Small Cover Stopper Installation - Horizon Fitness Perfect Binder BQ-260 Manual

6. Special Binding Method
6-1 Small Size Binding

6-1-3 Small Cover Stopper Installation

This section shows how to install small cover
stopper.
WARNING
- Depress stop button when small cover
stopper is installed. Nipper can cause
severe personal injury.
- Turn off power switch when back
cover is opened.
Necessary Parts : Small cover stopper
1.
Depress stop button.
2.
Turn cover stopper adjusting knob fully
clockwise.
3.
Hold back cover with your hand and
loosen two lock screws.
4.
Open back cover.
5.
Fix small cover stopper on cover stopper
with two lock screws.
NOTE
- When small cover stopper is installed, cover
sensor recognizes as if cover sheet is always
placed. Confirm whether cover is fed properly
on nipper unit before you start binding.
- Cover must be fed manually when small
cover stopper is mounted on cover stopper.
6.
Close back cover and fix with two lock
screws.
Cover Stopper Adjusting Knob
Sensor
46
Lock Screws
Back Cover
Lock Screws
Small
Cover
Stopper