Level Plate Clean Up - Horizon Fitness Perfect Binder BQ-260 Manual

7. After Binding Finish
7-2 Clean Up While Power On

7-2-2 Level Plate Clean Up

Level plate must be cleaned after binding
finished.
WARNING
- Depress stop button to prevent per-
sonal injury after step 4.
- Ware gloves on your hands. You
might unexpectedly touch melt tank
which is heated up to around 200
degrees. High temperature can cause
severe skin burn.
Necessary Tool : Cloth
1.
Pull up stop button.
2.
Select pad binding mode.
- Set nipping mode select switch to center.
Pad binding lamp in start button will turn
on.
Stop Button
Start Button
Nipping Mode Select Switch
56
Center
Pad Binding Lamp