5. Operation Procedure
5-2 Pad Binding
This section shows binding operation for pad
binding.
1.
Pull up stop button.
2.
When milling is required, depress mill-
ing start button.
3.
True up stock and insert stock into
clamper. Left side of stock must touch
register shaft in clamper.
NOTE
Left side of stock must be register side. Spine
of stock must face down.
4.
Confirm that lamp on start button is on
and then depress start button.
Stop Button
Clamper
Start Button
Level Plate Button
40
Milling Start Button