Roughening Cuter Replacement - Horizon Fitness Perfect Binder BQ-260 Manual

8. Maintenance
8-2 As Required

8-2-2 Roughening Cuter Replacement

Continuous use of dull roughening cutter will
effect on binding finish quality. Replace
roughening cutter as required.
WARNING
- Turn off main power before replacing
milling cutter.
- Ware gloves on your hands when
roughening cutter is replaced. Cutter
will cause severe personal injury.
Necessary Tools : Allen Wrench (5 mm)
1.
Turn off main power.
2.
Access to roughening cutter.
- Open safety cover.
- Open front milling guide.
- Remove spring on white cutter guard
from hook bolt.
3.
Open P.C.B. cover.
- Remove four fix screws and tilt down
P.C.B. cover.
4.
Depress release button to release brake
on milling cutter motor.
5.
Turn milling cutter slowly by hand to
access to roughening cutter lock screw.
Thick Cloth
Milling Cutter
Spring
Front Milling Guide
P.C.B. Cover
64
White Cutter Guard
Release Button