Error Treatment And Parameterisation - Festo CPX Series Manual

8. Analogue output module CPX-2AA-U-I

8.5.3 Error treatment and parameterisation

Festo P.BE-CPX-AX-EN en 1107f
The following diagrams show the error treatment in the ana-
logue output modules. Further reporting and display of the
error can be suppressed as desired with the appropriate
module parameter, represented in the diagram as a switch. A
description of the parameter can be found in section 8.4.3.
Error message to
field bus node
0 1
Monitoring
short circuit
at outputs
Error no. 26 Error no. 15
Error in Module
actuator supply defective
2
1
Module parameters
(switch position represented = default setting)
2
Module-specific errors
3
Channel-specific errors
Fig. 8/9: Principle of error treatment and parameterisation
of the analogue output modules – part 1
Module
error LED
1
8-39