6. Analogue input module CPX-4AE-TC
6.3
Installation
6-4
Warning
Unintentional movements of the connected actuators and
uncontrollable movements of loose tubing can cause injury
to human beings or damage to property.
Switch off the following equipment before undertaking
installation and/or maintenance work:
– Compressed air supply
– Operating and load voltage supplies
In the following sections you will find the pin allocation of the
analogue input modules for the different sub-bases.
Instructions on connecting the cables and plugs to the sub-
bases can be found in section 1.2.3.
Note in particular the instructions on connecting the cable
screening to functional earth (FE).
Festo P.BE-CPX-AX-EN en 1107f