1. Overview and connection technology I/O modules
Festo P.BE-CPX-AX-EN en 1107f
Sub-base CPX-AB-4-HAR-4POL
Note
In order that the completely fitted modules with sub-base
CPX-AB-4-HAR-4POL comply with protection class
IP65/IP67:
Use plugs type SEA-GS-HAR-4POL from the Festo range
•
(consisting of union nut, strain relief and splicing ring)
for connecting sensors and actuators.
Tighten the union nuts of the plugs at first by hand.
•
Seal the unused connecting sockets with protective
•
caps from Harting (see Accessories, appendix A.11).
Specifications of the cables for the sub-base
CPX-AB-4-HAR-4POL
–
Cable cross-sectional area:
–
Strand cross-section:
–
Insulation material:
–
Insulation thickness:
–
Core diameter:
–
Cable outer diameter:
2
0.25 ... 0.5 mm
up to 0.1 mm
PVC/PUR/PE
max. 1.6 mm
1.2 ... 1.6 mm
4.0 ... 5.1 mm
1-17