General Information On Parameterisation - Festo CPX Series Manual

5. Analogue input module CPX-4AE-T

5.4.2 General information on parameterisation

5-16
If necessary, use parameterisation to set other temperature
sensors, connection designs, diagnostic reactions, etc.
Due to in some cases necessary calculations, modified para-
meters are not valid until they have been thoroughly checked
and saved. Until then, as in the case of invalid parameters,
the previous settings apply.
Depending on the parameter, no valid analogue values are
available for up to max. 30 ms after a value modification.
Specific instructions for the prevention of
parameterisation errors
Parametrize in this sequence:
1. set the temperature sensor and the temperature
coefficients
2. set limit values
3. activate limit value monitoring.
Festo P.BE-CPX-AX-EN en 1107f