Assembly
7
Assembly
•
Assemble the module as outlined in the "Instruction manual for automation system
CPX-AP"è 1.1 Other applicable documents.
8
Installation
•
Carry out the installation according to the "Instruction manual for automation system CPX-AP"
è 1.1 Other applicable documents.
•
Use only plugs with gold-plated contacts to connect inputs [X0] ... [X3].
9
Commissioning
•
Commission the automation system CPX-AP in accordance with the "Instruction manual for auto-
mation system CPX-AP" è 1.1 Other applicable documents.
Behaviour of the display components of the module after error-free commissioning
[MD]
green light
Tab. 20 Behaviour of the LED displays of the module after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour:
è Instruction manual for automation system CPX-AP
è 11 Diagnostics and fault clearance
10
Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Festo — CPX-AP-I-4AI-U-I-RTD-M12 — 2020-03
19