Controllable Parameters - Imagine communications Platinum PM-FR-5 Installation And Operation Manual

38
Chapter 2
Frame Modules

Controllable Parameters

Table 2-8 PT-ALARM Parameters List
[RO] = Read-only parameter
Parameter
User Configurable Alarm Out (1-4)
PS Alarm (1-16) [RO]
Upper Fan Alarm
FAN_CRTL Alarm [RO]
Power Supply Presence (1-16) [RO]
+24VA Fail (1-16) [RO]
+24VB Fail (1-16) [RO]
+5VL Fail (1-16) [RO]
PS Fan Fail (1-16) [RO]
Power Supply Zone (1-16) [RO]
Lower Fan Alarm
External Alarm Enable
External Alarm Trigger Value
External Alarm
The PT-ALARM Parameters List includes all of the available parameters that are enabled and/
or changed via RouterMapper's Configure Module Parameters and/or Module Parameters
1
list box , or through CCS Navigator. Follow the appropriate steps, as described in the
applicable reference manual, to change the parameter instance to the desired setting.
Parameters marked with the [RO] designator are "read-only."
Description
Provides alarm reporting for any
status signal reported within the
Platinum system
Trips relay if power to the module is
lost
I/O fan fail alarm
Control area fans
Power supply failure alarm
+24VA alarm failure
+24VB alarm failure
+5VL alarm failure
Internal power supply fan alarm
Determines zone that a power
supply powers
I/O fan fail alarm
Enables alarms on GPI inputs to
alarm module
Determines value on GPI input that
will trigger alarm
Enables alarm reporting based on
GPI input
1
The Configure Module Parameters list box is available through the Configured Matrices tab. The Mod-
ule Parameters list box is available through the Detected Matrices tab.
Options
No alarm

Alarm

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

Zone 1

Zone 2

Zone 3

Zone 4

No

Yes

No

Yes

Low

High

No

Yes
