Table of Contents
Advertisement
412
Chapter 8
Configuration
4
If all devices have the same number of audio inputs, you are finished. Click OK.
5
To modify the partition assignment of a single output or group of outputs, click on the
desired circle (you can use the <Ctrl> key + left mouse button or the <Shift> key + left
mouse button to select groups).
6
Once the desired output(s) are selected, right-click, and then select Unassign from
[matrix].
Figure 8-17 Unassigning Selections from a Matrix
7
The selected outputs are no longer assigned to any matrix.
Advertisement
Table of Contents
