Figure 3-62 PT-FSDX8C1D-IBG Back Module
WARNING
Ensure you mate the front and back modules before plugging in the DensiShield
cable. This protects your back module from unintended alignment issues
Optical Back Module (SFP) with DensiShield (PT-FSDX8O1D-IBG)
The PT-FSDX8O1D-IBG Input module is based on the PT-FSDMX-IBG module and it
provides 8 input SDI options via SFP connectors. In addition, these 8 input SDI signals are
re-clocked and output via a DensiShield connector. This input module enables video matrix
expansion (See
A high density interconnect cable routes the eight incoming signals to a second frame.
DensiShield
OUT 1-8
Figure 3-63 PT-FSDX8O1D-IBG Back Module
Figure 3-64 PT-FSDX8O1D-IBG Back Module
Note: Back Module shown without SFP modules inserted.
Distributing Outputs to 2 Frames using
IN 1/2
IN 3/4
Installation, Configuration, and Operation Manual
PT-FSDX8C1D/PT-FSDX8O1D).
IN 5/6
IN 7/8
Platinum Frames and Modules
175