Table of Contents
Advertisement
6
Controlling Modules
Controlling Modules through Navigator
You can access and control parameters for Platinum Input (see
all supported input modules) and Output modules (see
supported output modules) through Navigator.
Navigator Build Mode v/s Control Mode
Navigator Build Mode is freely available. The Control Mode is available with the 30 day trial
version of Navigator, and as a licensed option. After the initial 30-day trial period, the
Navigator install reverts to a Build mode state.
You can tell what mode you're currently in by looking in the bottom right hand corner of the
Navigator application. Right click on the current mode to switch to the other mode.
Figure 6-1 Build/Control Mode in Navigator
You can control parameters on Platinum Modules in both Build Mode and Control Mode,
but in different ways. Follow these steps:
1
Create a new Routing System Via Poll
2
Choose to:
Control your Module in Navigator Build Mode
OR
Control your Module in Navigator Control Mode
Input Modules
for details on
Output Modules
for details on all
351
Advertisement
Table of Contents
