Table of Contents
Advertisement
394
Chapter 8
Configuration
Table 8-4 Application Parameters Available Through Configuration Utility Software
(* denotes default setting; [RO] = Read-only parameter)
Parameter
Frame Type [RO]
Detected Frame Type [RO]
Frame Id
Frame Name
CPU Id [RO]
Sync Mode1
•
•
Sync Mode4
The parameters listed in the Module Parameters list box are user-controllable. Selections
that are greyed out are read-only and cannot be changed.
descriptions, and options.
Description
Programmed frame size
Actual, physical frame size
Number assigned to frame from
application software to allow it to
participate in the control system
Alphanumeric string used in
application software to allow
user-friendly naming of the
Platinum frame; it shows in the
hardware list
PT-RES serial number; allows
licensing for options such as SNMP
Specifies sync settings for sync ports
(see the software application
manual for descriptions of these
settings)
Table 8-4
lists frame parameters,
Options
PM-FR-5
PM-FR-9
PT-FR-15
PT-FR-28
PM-FR-5
PM-FR-9
PT-FR-15
PT-FR-28
0 - 127
23 characters
12 characters
Auto
Standard
Advanced
Advertisement
Table of Contents
