Table of Contents
Advertisement
Platinum Frames and Modules
253
Installation, Configuration, and Operation Manual
Note: PM- series modules operate in 5RU and 9RU frames only. PT- series modules operate
in 5RU, 9RU, 15RU, and 28RU frames.
The AES TDM output module allows for the connection of 16 output channels of AES
digital audio, using either a balanced or coaxial back module within the Platinum platform,
and supports Time Division Multiplexed (TDM) AES routing.
Audio processing functions, as well as signal level conversion and presence detection, are
handled within an FPGA-based circuit. The 16-channel TDM output module uses only one
high speed LVDS signal to receive the various AES signals for presentation at the outputs.
The AES TDM output module also provides output presence detection and true output
monitoring on each of the 16 channels.
Back Panel I/O Module for PM-AEBT-OB/PT-AEBT-OB and
PM-AECT-OB/PT-AECT-OB
The PT-AEB-OBP back panel I/O module corresponds to the PM-AEBT-OB and the
PT-AEBT-OB output modules. The PT-AEC-OBP back panel I/O module corresponds to the
PM-AECT-OB and PT-AECT-OB output modules. DB-25 connectors are used on the
PT-AEB-OBP and PT-AEC-OBP back panel I/O modules. To provide the required BNC
interface, the PT-AEC-BOC must be used in conjunction with the PT-AEC-OBP for
connection to coaxial cables.
Figure 4-26 PT-AEC-BOC Cables
Installation
Output Module Installation
All output modules are installed at our manufacturing facility. See
Installing Input and
Output Modules
on page 361 for the procedure for field expansion of output modules. If
you need to purchase additional components, please contact your dealer or our Sales
Department.
Advertisement
Table of Contents
