Using Px-Res In A Platinum Frame - Imagine communications Platinum PM-FR-5 Installation And Operation Manual

Using PX-RES in a Platinum Frame

When a Platinum PX-RES module is installed in a Platinum frame, it becomes part of the
Platinum IP3 Control System where the web-based IP3 Controller GUI is used for
configuration, control, and monitoring of the entire system. The IP3 Controller must be
version 1.3.3 or higher and the PX-RES module(s) must be version 1.5 or higher. To
configure & control your Platinum Router using the IP3 Controller, you need to add your
Platinum Frame to the routing system in the IP3 Controller web interface, along with other
setup details. Please refer to the Platinum IP3 Controller User Manual for details.
The following is a module compatibility matrix with details on supported and unsupported
PT/PX modules when PX-RES is used a Platinum frame.
Module
(PX) Input Modules
PX-HSR9C-IBG
PX-HSR9C1D-IBG
PX-HSR9O-IBG
PX-HSR9O1D-IBG
PX-HSR8C-IBG
PM-HSR8C-IBG
PX-HSR2C2D-IBG
PX-HSR1C1D-IBG
(PX) Output Modules
PX-HSR16C-OBG
PX-HSR8C2D-OBG
PX-HSR8O2D-OBG
PX-HSR16O-OBG
PX-HSRSXP2D-OBG
PX-HSRMX8C2D-OBG
PX-HSRMX8O2D-OBG
PX-HSR8CMX8C-OBG
PX-HSR8OMX8O-OBG
Installation, Configuration, and Operation Manual
PX-RES in Module
Platinum
(PT) Input Modules
PT-ADCT-IB
PM-ADCT-IB
PT-AEBT-IB
PM-AEBT-IB
PT-AECT-IB
PM-AECT-IB
PT-DEC-IB
PM-DEC-IB
PT-FSDMX-IBG/ PT-FSDMXO-IBG
PT-FSDX8C1D-IBG
PT-FSDX8O1D-IBG
PT-HS-IB+
PT-HSO-PIN-IB+ (PT-HSO-IB+)
PT-HSR1D-IBG/ PT-HSR2D-IBG
PT-HSR8C1D-IBG
PT-HSR8O1D-IBG
PT-MADI4C-IBG/ PT-MADI4O-IBG
(PT) Output Modules
PT-AEBT-OB
PM-AEBT-OB
PT-AECT-OB
PM-AECT-OB
PT-DACT-OB
PM-DACT-OB
PT-ENC-OB
PM-ENC-OB
PT-HSR-OB+
PM-HSR-OB+
PT-HSR-OBG+
PM-HSR-OBG+/ PT-HSRO-OBG+
PT-HSRMX8C-OBG
PT-HSRMX8O-OBG
PT-MADI4C-OBG/PT-MADI4O-OBG
PT-SR-OBG+/ PM-SR-OBG+
Platinum Frames and Modules
PX-RES in
Platinum
29