Table of Contents
Advertisement
340
Chapter 5
Crosspoint Modules
PM-72×64-3G5: 72x64 3G HD-SDI Crosspoint Modules
Operation
Installation
Configuration
PM-72×64-3G5 modules operate in 5RU frames only.
Figure 5-5 PM-72×64-3G5 Module
The PM-72×64-3G5 crosspoint module switches signals accepted from input modules and
distributes these signals to output modules. It also switches auxiliary signals.
The PM-72×64-3G5 crosspoint matrix contains a 72×64 I/O signal switch fabric as well as
additional auxiliary crosspoint switch capability.
Figure 5-1
on page 334 shows the basic signal flow of the Platinum crosspoint module.
All crosspoint modules are installed at our manufacturing facility. See
Pre-Installation Information for Upgrading 3 Gb Input, Output, and Crosspoint
Module Firmware
on page 357 and
procedure for field expansion of crosspoint modules. If you need to purchase additional
components, please contact your dealer or our Sales Department.
This module requires no additional configuration procedures besides those described for
frame configuration.
Installing Crosspoint Modules
Special
on page 363 for the
Advertisement
Table of Contents
