Controllable Parameters
Table 5-4
parameters are accessible via either RouterMapper or CCS Navigator. In RouterMapper,
parameters are found in the Configure Module Parameters and/or Module Parameters list
boxes. In Navigator, when in control mode, double-click on the device name to open a
window that displays that device's parameter list.
See the appropriate reference manual for information on how to set these parameters.
Table 5-4 PM-72×64-3G5 User-Controllable Parameters List
(* denotes default value; [RO] denotes read-only value)
Parameter
Temperature Reading [RO]
Functional Block Diagram
See
Specifications
There are no separate specifications associated with this module.
lists the user-controllable parameters for the PM-72×64-3G5 modules. These
Description
Monitors internal frame
temperature
Figure 5-1
on page 334.
Platinum Frames and Modules
Installation, Configuration, and Operation Manual
Options
-55°C – 125°C in 0.5°C increments
341