Table of Contents
Advertisement
360
Chapter 7
Installation
9
10
11
12
The Firmware Upgrade message window will appear. The steps in the upgrade process will
be listed as they occur.
If you need to stop the upgrade procedure at any time, click Cancel. The window will
display a message that says "Aborting firmware upgrade...Please wait." The upgrade will
continue until the firmware upgrade process is in a safe place to stop.
When all of your boards successfully upgrade (the upgrade process tries to perform the
upgrade up to three times each before declaring an upgrade a total failure) you will see a
"Firmware Upgrade Successful" message in the upgrade dialog box.
Figure 7-4 Successful Firmware Upgrade Message
When the process is complete, click OK or click the Close (X) box in the upper right corner
of the Firmware Upgrade message window.
Click OK to return to the main window.
Advertisement
Table of Contents
