12
Chapter 1
Introduction
Table 1-3 Input Modules (Continued)
Part Number
Description
PM-S-IB
Digital multi-rate version designed to support any digital signal
PT-S-IB
between 3 Mb/s and 540 Mb/s (see page 78)
PM-S-IB+
Digital multi-rate version designed to support any digital signal
PT-S-IB+
between 3 Mb/s and 540 Mb/s (see page 74)
PT-MADI4C-IBG
Platinum Multichannel Audio Digital Interface (MADI) Input Module
(see page 150)
PX-HSR8C-IBG
Digital Multirate Input Module
(New)
(see page 60)
Output Modules
Note: See
Special Pre-Installation Information for Upgrading 3 Gb Input, Output,
and Crosspoint Module Firmware
Modules
on page 361 for information about installing output modules. See
Installation and Removal Procedures for PT-HS1310S-IB, PT-HSRO-OBG+, and
PT-HSR1310S-OB Fiber Optical Modules
PT-HSR1310S-OB fiber optical modules.
Table 1-4 Output Modules
Part Number
Description
PM-AEB-OB
AES balanced/unbalanced (coaxial) output front module (see
PM-AEC-OB
page 218)
PT-AEB-OB
PT-AEC-OB
PM-AEBT-OB
AES output front module with TDM capability (see page 224)
PM-AECT-OB
PT-AEBT-OB
PT-AECT-OB
PM-DAC-OB
AES to analog audio converter output module (see page 237)
PT-DAC-OB
PM-DACT-OB
Audio D/A output module with TDM capability (see page 244)
PT-DACT-OB
PM-ENC-DOB
SDI to analog video encoder module and dual output back panel
PT-ENC-DOB
(see page 231)
PM-ENC-OB
SDI to analog video encoder module (see page 231)
PT-ENC-OB
PT-HSR1310S-OB
Fiber optical transmitter module (see page 252)
PM-HSR-DOB
Dual wideband, digital multi-rate version designed to support bilevel
PT-HSR-DOB
digital signals between 3 Mb/s and 1.5 Gb/s with reclocking for all
standard SMPTE data rates in this range; dual outputs (see
page 198)
PM-HSR-OB
Wideband, digital multi-rate version designed to support bilevel
PT-HSR-OB
digital signals between 3 Mb/s and 1.5 Gb/s with reclocking for all
standard SMPTE data rates in this range (see page 198)
on page 357 and
Installing Input and Output
on page 365 for information about installing
Specialized