Table of Contents
Advertisement
Specifications
Table 3-47 I/O Specifications
Item
Input connector
Impedance
Signal type
Maximum input level
Return loss (BNC, HD-BNC)
Equalization (BNC, HD-BNC)
LED Indicators
Table 3-48 LEDs
Specification
75 Ohm BNC per IEC 169-8
75 Ohm HD-BNC
LC optical
DensiShield
75 Ohms (BNC, HD-BNC)
50 Ohms differential (DensiShield)
SMPTE 424M, SMPTE 292M, SMPTE 259M,
SMPTE 344M, DVB-ASI
Most other < 1Vpp digital signals, 3Mb/s to 3.0Gb/s
880mV (BNC, HD-BNC)
1600mVp-p differential (DensiShield)
Optical depends on SFP used
> 15dB, up to 1.485GHz
> 10dB, 1.485GHz to 2.97GHz
Automatic
400m Belden 1694A for 270Mb/s data rate
200m Belden 1694A for 1.485Gb/s data rate
150m Belden 1694A for 2.97Gb/s data rate
Each of the nine input channels provide signal presence
reporting through card-edge mounted LEDs.
Three system LEDs are also present.
POWER - Power supply indicator – +24V power rails are
operational (Green)
ACT CTRL - Active Control – initializes red, turns green
when the FPGA has configured and the control system is
communicating with the card. Flashes green if there is
an alarm condition on the card.
ACT IN - Active Input warning. Yellow indicates if an
input on the card being used by an output.
Platinum Frames and Modules
Installation, Configuration, and Operation Manual
149
Advertisement
Table of Contents
