Layer 3" Menu; Nat; Basic - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Configuring with Web Based Management

5.8 "Layer 3" menu

Description
The table has the following columns:
● Port
Shows the port.
● Setting
Specify the LLDP functionality. The following options are available:
– Tx
– Rx
– Rx & Tx
– "-" (Disabled)
Procedure
1. Select the required LLDP functionality from the drop-down list.
2. Click the "Set Values" button.
5.8 "Layer 3" menu
Layer 3 possible only with SCALANCE W722-1 RJ-45
The use of the layer 3 functions is possible only with the client SCALANCE W722-1 RJ-45.
5.8.1

NAT

5.8.1.1

Basic

Requirements to be able to use NAT:
● Client SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 / 6GK5722-1FC00-
0AB0 (US version))
Note
This tab is only available in the client mode.
On this page, you specify the basic settings for NAT.
216
This port can only send LLDP frames.
This port can only receive LLDP frames.
This port can receive and send LLDP frames.
This port can neither receive nor send LLDP frames.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03