Wds List - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Industrial wireless lan to ieee 802.11n web based management
Table of Contents

Advertisement

● Type
Shows the client type, for example "Sta" stands for IEEE 802.11 standard client.
● MAC Address
Shows the MAC address of the client.
● System Name
Shows the system name of the client if the client communicates this to the access point.
Not all clients support this parameter.
● Channel
Shows the channel over which the client communicates with the access point.
● Signal Strength [dBm]
Shows the signal strength of the connected client in bBm.
● Signal Strength [%]
Shows the signal strength of the connected client as a percentage.
● Age [s]
Shows the time that has elapsed since the last client activity.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
● WLAN Mode
Shows the transmission standard. If DFS is activated, the transmission standard
"802.11h" is not shown additionally but only the configured transmission standard
"802.11a".
● Max. Data Rate [Mbps]
Shows the maximum data transmission speed in megabits per second.
● State
Shows the current status of the connection, for example Connected means that the client
is connected to the AP and is ready to communicate with the AP.
5.4.11.3

WDS List

Communication between access points
In normal operation, the access point is used as an interface to a network and communicates
with clients. There are, however, situations in which several access points need to
communicate with each other, for example to extend wireless coverage or to set up a
wireless backbone. This mode is possible with WDS (Wireless Distributed System).
As default, the list is updated every 2 seconds. To disable the update, click "On". Instead of
"On", "Off" is displayed. As default, updating is always enabled on the WBM page.
Note
This tab is available only in access point mode.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Configuring with Web Based Management
5.4 "Information" menu
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents