Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 181

5.6.2.6 AP
Configuration
On this page, you specify the configuration for the access point.
Note
This tab is available only in access point mode.
Description
Table 1 has the following columns:
● Radio
Shows the available WLAN interfaces in this column.
● Channel
Specify the main channel.
If you want the access point to search for a free channel itself, use "Auto". The selection
of channels used by an access point when establishing a wireless cell can be restricted.
To do this, select the "Use Allowed Channels only" check box on the Allowed Channels"
tab.
.If you want to use a fixed channel, select the required channel from the drop-down list.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Configuring with Web Based Management
5.6 "Interfaces" menu
181