Wlan Authentication Log - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

5.4.5.2

WLAN Authentication Log

Logging authentication attempts
This page shows a table with information on successful or failed authentication attempts.
You cannot configure anything on this page.
Description
The table has the following columns:
● Restart
Counts the number of restarts since you last reset to factory settings and shows the
device restart after which the corresponding event occurred.
● System Up Time
Shows the time the device has been running since the last restart when the described
fault occurred.
● System Time
Shows the time at which the described error occurred.
● Log Message
Displays a brief description of the event that has occurred. You will find the list of possible
messages in Appendix D of the configuration manual.
If the system time is set, the time is also displayed at which the event occurred.
Description of the button
"Clear" button
Click this button to delete the content of the log file. The display is also cleared. The restart
counter is only reset after you have restored the device to the factory settings and restarted
the device.
Note
The number of entries in this table is restricted to 400. When this number is reached, the
oldest entries are overwritten. The table remains permanently in memory.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Configuring with Web Based Management
5.4 "Information" menu
71