Country Settings - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Configuring with Web Based Management
5.3 "Wizard" menu
5.3.1.2

Country Settings

Introduction
On this Basic Wizard page, you configure the country and the system name.
Description
The Basic Wizard page contains the following boxes
● "Country Code" drop-down list
From this drop-down list, you select the country in which the device will be deployed. You
do not need to know the data for the specific country, the channel division and output
power are set by the device according to the country you select.
Note
Locale setting
The correct country setting is mandatory for operation complying with the approvals.
Selecting a country different from the country of use can lead to legal prosecution.
● "System Name" input box
You can enter the name of the device. If you configure this box, this configuration is
adopted and displayed in the selection area. A maximum of 255 characters are possible.
The system name is also displayed in the CLI input prompt. The number of characters in
the CLI input prompt is limited. The system name is truncated after 16 characters.
44
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03