Log Tables; Event Log - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Configuring with Web Based Management
5.4 "Information" menu
Description
The table has the following columns:
● Interface
Shows the interface via which the row entry was learnt.
● MAC Address
Shows the MAC address of the target device.
● IP Address
Shows the IP address of the target device.
● Media Type
Shows the type of connection.
– Dynamic
– Static
5.4.5

Log Tables

5.4.5.1

Event Log

Logging events
The device allows you to log occurring events, some of which you can specify on the page of
the System > Events menu. This, for example, allows you to record when an authentication
attempt failed or when the connection status of a port has changed.
The content of the events log table is retained even when the device is turned off.
You cannot configure anything on this page.
68
The device recognized the address data automatically.
The addresses were entered as static addresses.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03