Dot1X Radius Server Settings - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Configuring with Web Based Management
5.3 "Wizard" menu
Description
Table 1 contains the following columns:
● Radio
Shows the available WLAN interfaces.
● Dot1x User Name
Enter the user name with which the client will log on with the RADIUS server.
● Dot1x User Password
Enter the password for the user name selected above. The client is logged on with the
RADIUS server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
● Dot1x User Password Confirmation
Enter the password again in this input box.
5.3.1.12

Dot1x Radius Server Settings

Introduction
On this Basic Wizard page, you configure the settings for the primary RADIUS Server.
After completing the Basic Wizard, you can configure a backup server and other settings, for
example the number of logon attempts with "Security > WLAN > AP Radius Authenticator".
Note
This page is available only in access point mode.
Description
This table contains the following columns:
● Server Role
Shows the role of the server.
● Server IP Address
Enter the IP address or the FQDN name of the RADIUS server.
58
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03