Cist Port - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

5.7.3.3

CIST Port

MSTP-CIST port configuration
When the page is called, the table displays the current status of the configuration of the port
parameters.
To configure them, click the relevant cells in the port table.
Description
Table 1 has the following columns:
● Column 1
Shows that the settings made in this table will be adopted for all ports of table 2 after
clicking the "Copy to Table" button.
● Spanning Tree Status
In the drop-down list, select the setting for all ports. If "No Change" is selected, the entries
of the corresponding column in table 2 remain unchanged.
● Copy to Table
If you click the button, the settings are adopted for all ports of table 2.
Table 2 has the following columns:
● Port
Shows all available ports and the following interfaces.
– Port X
– WLAN X
– VAP X.Y
– WDS X.Y
● Spanning Tree Status
Specify whether the port is integrated in the spanning tree or not.
Note
If you disable the "Spanning Tree" option for a port, this may cause the formation of
loops. The topology must be kept in mind.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Configuring with Web Based Management
5.7 "Layer 2" menu
207