Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 131

Description
The page contains the following boxes:
● SMTP Client
Enable or disable the SMTP client.
● Sender Email Address
Enter the name of the sender to be included in the e-mail, for example the device name.
This setting applies to all configured SMTP servers.
● Send Test Mail
Send a test e-mail to check your configuration.
● SMTP Port
Enter the port via which your SMTP server can be reached.
Factory settings: 25
This setting applies to all configured SMTP servers.
● SMTP Server IP Address
Enter the IP address or the FQDN name of the SMTP server.
This table contains the following columns:
● Select
● SMTP Server Address
Shows the IP address or the FQDN name of the SMTP server.
● Receiver Email Address
Enter the e-mail address to which the device sends an e-mail if a fault occurs.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
Enable the check box in a row to be deleted.
Configuring with Web Based Management
5.5 "System" menu
131