Load&Save - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

5.5.7 Load&Save
Overview of the file types
Table 5- 1
File type
Config
ConfigPack
CountryList
Debug
Firmware
GSDML
HTTPS Cert
LogFile
MIB
Script
StartupInfo
Users
WLANAuthlo
g
WLANCert
(in client
mode only)
WLANServC
ert
(in client
mode only)
WLANSigRe
c
(in client
mode only)
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
HTTP
Start configuration
Detailed configuration information. for example,
start configuration, users, certificates
The zip file contains the country list as a csv and as
a pdf file.
This file contains information for Siemens Support.
Firmware
Information on the device properties
HTTPS certificate
File with entries from the event log table
Private MSPS MIB file "Scalance_w_msps.mib"
CLI script file
Startup log file
File with user names and passwords
File with entries from the WLAN Authentication Log
(information on successful or failed authentication
attempts)
User certificate. You can specify a password for the
user certificate on the WBM page "Load&Save >
Password".
Server certificate.
The zip file contains the following:
csv file with the measured values of the signal
•
recorder
pdf file with the measured values and an addi-
•
tional graphic representation of the measured
values.
You will find information about the measured val-
ues and their graphic representation in the section
"Signal Recorder (Page 193)".
Configuring with Web Based Management
Down- Save
load
X
X
--
--
X
--
X
--
--
X
--
X
--
X
X
--
5.5 "System" menu
Delete
X --
X --
X --
X X
-- --
X --
-- X
X --
X --
-- --
X --
X --
X --
X X
-- X
X X
119