Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 83

Description
● IP Address
Shows the IPv4 address assigned to the device.
● Pool ID
Shows the number of the IPv4 address band.
● HW Type
Shows that the DHCP server identifies the devices in the network based on the MAC
address.
● HW Address
Shows the MAC address of the DHCP client.
● Allocation Method
Shows whether the IPv4 address was assigned statically or dynamically. You configure
the static entries in "System > DHCP > Static Leases".
● Binding State
Shows the status of the assignment.
– assigned
– not assigned
– probing
– unknown
● Expire Time
Shows how long the assigned IPv4 address is still valid. Once this period has elapsed,
the device must either request a new IPv4 address or extend the lease time of the
existing IPv4 address.
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
The assignment is used.
The assignment is not used.
The assignment is being checked.
The status of the assignment is unknown.
Configuring with Web Based Management
5.4 "Information" menu
83