Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual page 70

Configuring with Web Based Management
5.4 "Information" menu
● Severity
Shows the severity of the message.
● Log Message
Displays a brief description of the event that has occurred. You will find the list of possible
messages in Appendix D of the configuration manual.
If the system time is set, the time is also displayed at which the event occurred.
Description of the button
"Clear" button
Click this button to delete the content of the event log file. The display is also cleared. The
restart counter is only reset after you have restored the device to the factory settings and
restarted the device.
Note
The number of entries in this table is restricted to 400. When this number is reached, the
oldest entries are overwritten. The table remains permanently in memory.
"Show all" button
Click this button to display all the entries on the WBM page. Note that displaying all
messages can take some time. The button only becomes active if there is more than one
page.
"Next" button
Click this button to go to the next page. The button only becomes active if there is more than
one page.
"Prev" button
Click this button to go to the previous page. The button only becomes active if there is more
than one page.
Drop-down list for page change
From the drop-down list, select the page you want to go to. This list only becomes active if
there is more than one page.
70
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03