Choosing A Language; Setting Pacemaker Detection Sensitivity; Setting Save Option; Entering Institution - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
After setup, press Enter to confirm. Then the System Setup interface appears.
For SE-601A, if you press Esc to exit the More Setup interface after setup, a hint will pop up to
prompt you to save these modifications.

9.9.1 Choosing a Language

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Language item on the More
Setup interface, and then press F1 or F2 to select a language.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Language item on the
More Setup interface, and then press F3 or F4 to select a language.

9.9.2 Setting Pacemaker Detection Sensitivity

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Pacemaker Detection
Sensitivity item on the More Setup interface, and then press F1 or F2 to select Low or High.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Pacemaker Detection
Sensitivity item on the More Setup interface, and then press F3 or F4 to select Low or High.
When Pacemaker Detection Sensitivity is set to High, the pacemaker signals are easy to be
detected.
When Pacemaker Detection Sensitivity is set to low, the pacemaker signals are not easy to be
detected.
For more information about the detectable parameter ranges, please refer to Appendix 1,
"Technical Specifications".

9.9.3 Setting Save Option

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Save Option item on the
More Setup interface, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Save Option item on
the More Setup interface, and then press F3 or F4 to select Off or On.
When Save Option is set to On, ECG data in the AUTO or RHYT mode will be saved into the
flash memory of the device automatically after an ECG report is printed out.
When Save Option is set to Off, ECG data will not be saved into the flash memory of the device.
Note: In the period sampling mode and in the auto style of 6×2 adjust, the ECG data will
not be saved.

9.9.4 Entering Institution

Press Tab or Shift + Tab to move the cursor to the Institution textbox on the More Setup
interface, and then manually input the institution name. For SE-601B/C, the range is within 20
characters. For SE-601A, the range is within 10 characters.
- 92 -