SE-601 Series Electrocardiograph User Manual
On the Display&Sound Setup interface, you can set Brightness, Display Colors, Antialising,
Key Volume, Hint Volume, QRS Volume and Notify Volume.
Figure 9-13 SE-601B Display & Sound Setup Interface
Figure 9-14 SE-601C Display & Sound Setup Interface
Figure 9-15 SE-601A Sound Setup Interface
After setup, press Enter to confirm. Then the System Setup interface appears.
For SE-601A, if you press Esc to exit the Display&Sound Setup interface after setup, a hint will
pop up to prompt you to save these modifications.
9.6.1 Setting Brightness (Only for SE-601B)
Press Tab or Shift + Tab to move the cursor to the Brightness progress bar on the
Display&Sound Setup interface, and then press F3 or F4 to adjust the brightness of the LCD
screen. You can set the brightness within 0~20.
9.6.2 Selecting Display Colors (Only for SE-601C)
Press Tab or Shift + Tab to move the cursor to the Display Colors item on the Display&Sound
Setup interface, and then press F1 or F2 to select Option1 or Option2.
- 84 -