Selecting Patient Information - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
Note: The style of the loaded thermal paper should consist with the set paper style;
otherwise the advance of the paper may be blocked.
When Paper Marker is set to No,
1) The device does not roll back the recorder paper to the start point of each page at the beginning
of the printing course, and it does not advance the paper to the next paper marker at the end of the
printing course.
2) Before printing, you can press the Space key to advance the paper for about 2cm.

9.3.3 Selecting Patient Information

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Patient Info item on the
Record Setup interface, and then press F1 or F2 to select Off or On.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Patient Info item on
the Record Setup interface, and then press F3 or F4 to select Off or On.
In the AUTO mode, when Patient Info is set to On, the patient information will be printed in the
ECG reports.
In the AUTO mode, when Patient Info is set to Off, the patient information will not be printed in
the ECG reports.
- 78 -