Setting Prompt; Inputting Extra Question; Date & Time Setup - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
the auto style, speed and gain which are shown on the bottom of the interface.
When Next Patient is set to Off, in the AUTO mode, the system will not display the main
interface3 after a complete ECG report is printed.

9.7.7 Setting Prompt

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Prompt item on the Patient
Question interface, and then press F1 or F2 to select Reviewed by or Unconfirmed Report.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Prompt item on the
Patient Question interface, and then press F3 or F4 to select Reviewed by or Unconfirmed
Report.
When Prompt is set to Reviewed by, if Doctor on the Patient Question interface is set to On,
and the doctor name is input in the Patient Information window, the doctor's name is printed on
the bottom of ECG reports.
When Prompt is set to Unconfirmed Report, Unconfirmed Report is printed on the bottom of
ECG reports, and doctor name will not be printed on the bottom of ECG reports.

9.7.8 Inputting Extra Question

Press Tab or Shift + Tab to move the cursor to the Extra Question textbox on the Patient
Question interface, and then manually input extra information such as Tel, which will be
displayed in the Patient Information window.
9.8 Date & Time Setup
Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Date & Time on the System
Setup interface, and then press Enter to open the Date&Time interface.
On the Date&Time Setup interface, you can set Current Date, Current Time, Date Mode,
Time Mode, Period Interval, Period Duration, Power Off and LCD Off.
Figure 9-20 SE-601B / SE-601C Date&Time Setup Interface
- 89 -