EDAN SE-601 Series User Manual page 50

SE-601B / SE-601C Work Mode Setup Interface
4) On the System Setup interface, press F1, F2, F3, F4, Tab or Shift + Tab to move the
cursor. When the cursor is on Lead, press Enter to open the Lead Setup interface.
5) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Lead Sequence
item, and then press F1 or F2 to select a sequence.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Lead
Sequence item, and then press F3 or F4 to select a sequence.
6) Press Enter to confirm.
After setup, press Esc or the function key F5 below
SE-601 Series Electrocardiograph User Manual
SE-601A Work Mode Setup Interface
SE-601B / SE-601C Lead Setup Interface
SE-601A Lead Setup Interface
- 43 -
to exit the System Setup