EDAN SE-601 Series User Manual page 105

Electrocardiograph
Hide thumbs Also See for SE-601 Series:
Table of Contents

Advertisement

SE-601 Series Electrocardiograph User Manual
2. Printing Problems
Q1: I was encountered with paper-jam, what was I supposed to do?
A1: If it happened for the first time, it might be the result of an inappropriate placement of the
paper. In this case, please open the paper casing, pull the paper out of the paper tray, tear the
pages with rumples, and then put the paper in the paper tray again, adjust the position of the paper
carefully and close the casing.
If it happened several times, it might have something to do with your operating. If Paper Marker
is set to Style1 or Style2, and the printing course is often stopped manually in the AUTO or
RHTY mode, it may cause paper-jam sometimes because of the back-rolling of the thermal
recorder. In this case, if the manual termination of the printing course in the AUTO or RHTY
mode happens frequently, Paper Marker on the Record Setup interface should be set to No,
which brings no back-rolling at the beginning of the printing course.
If none of the above-mentioned situations is applicable, there might be some problem with the
printing module. Please contact the manufacturer or the local distributor for further disposal.
Q2: The hint Paper Error is displayed on the screen, what should I do?
A2: It might be the result of unsuccessful detection of the paper markers, first open the paper
casing so as to clear the error information, and then check whether the paper marker is on the
bottom of the paper. Reload the paper in the paper tray. If it doesn't work, change the paper.
If the problem still exists, please contact the manufacturer or the local distributor for further
disposal.
Q3: The hint No Paper is displayed on the screen, what should I do?
A3: Check whether the paper runs out, or the paper marker is just facing the paper maker
detection window on the thermal printing head, as the following figure shows.
Reload the paper in the paper tray, close the paper casing firmly. If the problem still exists, please
contact the manufacturer or the local distributor for further disposal.
- 98 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents